Skip to main content

Spatialitics

Home › Knowledge Hub : Whitepaper › Geo-Enabled Location Request Management at WaterOne
Whitepaper

Geo-Enabled Location Request Management at WaterOne

Modernizing the Buried Asset Locate Process

Locating Assets for Water Utility Unleash the Power of Spatial Analytics

Introduction

The precise location of underground utilities must be known, managed, and shared to avoid damage to gas, electric, communications, water and sewer lines. Inadvertent damage by construction or other activities can lead to service disruptions, serious injuries, costly fines and repairs, and erosion of public trust. Digging and excavation accidents are the leading source of damage to underground utility infrastructure in the United States. A recent example of this was the gas explosion in North Carolina in April 2019, triggered when a contractor bored through a 2-inch natural gas pipeline.

20 Million Miles+
of underground utilities
There are more than 20 million miles of buried underground utilities in the United States. Utility companies are mandated to provide location verification and marking services of their buried assets as a condition of operation. Any time a citizen or contractor needs to dig, they are required by law to request an asset location usually within a specified time period, i.e. 3 days. This creates a burden for the utility given the complex nature of the line locate process across multiple departments and systems within and sometimes beyond the utility itself. Often services like "Kansas One Call," "Call 811," and others are utilized, but these services can be expensive, and don't help the utility conduct the actual locate process in the field, much less optimize it.

Figure 1: North Carolina Explosion Site (Source: http://time.com)

The Standard Operating Procedure for a Line Locate Request involves:

Failure to call the local one call center or utility ahead of time could lead to fines or even civil or criminal charges against the individual or the company. Negligence, if proven, could lead to serious accidents, loss of utility services to the customers, and evacuations in case of noxious gas leak or water boil advisories.

Utilities locate and mark buried assets within areas to be excavated by color coding them to identify them for avoidance during excavations. Colored lines applied with aerosol paint and flags are used to mark locations and to denote the type of utility.

Utility companies often struggle to manage this workflow, with varying numbers of locate requests received each day on a continuous basis. Conventional locate processes are cumbersome and can be prone to errors. Without automation tools, utilities struggle to improve the process for synchronizing, communicating, and validating the work done by in-house utility personnel and the entity requesting the locate.

A Move of Innovation at WaterOne

WaterOne, a leading independent public water utility located in Johnson County, Kansas, serves over 440,000 people in a 272 square-mile service area. In recent years, over 22,0000 underground asset location requests have been submitted by homeowners, contractors and other utilities digging in the WaterOne service area. Historically, the asset location request process has been managed manually, with numerous independent touchpoints across many departments and enterprise business systems (GIS, SAP, Dispatch, etc.). The process was manual, paper-based, time consuming, difficult to track, schedule, execute, and led to challenges with work management and customer experience.

To continue providing a safe, reliable, high-quality water supply with exceptional service and value, WaterOne leadership envisioned a modern, scalable and geo-enabled Locate Request Management System (LRMS). WaterOne is using technology to facilitate effective and efficient water operations, making strategic investments in Enterprise software over the last decade to optimize and improve the overall efficiency which ultimately benefits customers through low water rates. The selection, acquisition, and implementation of SAP and Esri ArcGIS were key components of this strategy. SAP is the mission critical system driving core business processes, and Esri software drives creation and management of authoritative Geospatial data such as the location of water mains and service connections.

WaterOne turned to Spatialitics to provide a cloud-based geo-enabled solution to digitize and automate the asset locate request management lifecycles. The new LRMS, integrates these Enterprise systems to streamline the asset location process. The Spatialitics solution offers three distinct portals with the overall LRMS targeting different user roles as listed below and with Figures 2, 3 and 4:

  1. Requesters, i.e. the Customers
  2. Supervisors
  3. Field Locators

The solution provides intuitive, easy-to-use geospatial tools to send and manage locate requests using a map. It bridges SAP and Esri ArcGIS, serving as a real-time integration mechanism facilitating real time synchronization of information between these two mission-critical systems. In addition, the solution provides the intelligence to auto-validate locate requests where there were no assets found in the area of planned excavation. This has resulted in 8% of all customer requests received being checked, cleared, and communicated back to the customer without the intervention or expense of WaterOne’s personnel, enhancing the service experience for the customer and the cost of service for the utility.

Request a Locate

Customer Mode

Secure self-service customer facing web portal to create, monitor, modify requests and review request history

Figure 2

Line Locate

Supervisor Mode

Tools for supervisors to manage and monitor open locate requests, assign new requests and balance work load for the locators

Figure 3

Line Locate

Locator Mode

A highly responsive application for field personnel to plan their day, log request activity and close notifications

Figure 4

1

User plans an excavation

2

Registered user/guest logins into the "Locate Request Management" portal

3

Marks the location on map and submits request

4

Calls emergency request number

5

WaterOne dispatcher creates a request on behalf of user

6

User/Guest receives an email notification

7

Supervisor verifies the requests on the portal and assigns it to a locator

8

Locator identifies the requested location

9

Locator routes to the location on map

10

Locator finds the position of underground assets and marks them with paint on the ground

11

Locator completes the request

12

User receives 'Locate complete' email

Figure 5: ‘Request a Locate’ at WaterOne

The overall process to request a locate is illustrated in Figure 5 above and is described as follows:

The Transformation of an Outdated Process

Transformation to a geo-enabled Locate Request Management System from "Call before you dig" process

Customers mark the location directly on map with a polygon, in addition to written description of the area to be marked

Paperless locate request and approval workflows

Optimum routing for field personnel to verify assigned locates

Bulk assigning of locate requests to a locator

Real-time synchronization between SAP and GIS

Figure 6: Line Locate Process Transformation

As part of the transformation process, WaterOne involved the customers in the development and roll out of the application. WaterOne took steps to ensure a successful implementation of the new application:

  • Invited several of the largest Users of the old system and a few of the small Users to explain what we were considering changing and what suggestions they had etc.
    • Asked if they would be willing to test the new application once it was ready and had a few volunteers
  • Sent an email to all the Users of the Old System letting them know that we were working to improve the process and provided an estimated date of when the new LRMS was going live.
  • Performed internal testing of the application, both before and after go-live date.
  • Once the application was ready, WaterOne went to the group that agreed to test the system.
  • After the initial testing, some additional modifications were made and then began to roll it out gradually for real time use.
    • Added a training video/tutorial on our website for Users to access for training
  • Sent automatic reply to all incoming emails to old system advising users that new system would be ready soon.
  • Dispatchers encouraged callers to use the LRMS and helped them with their questions.
2,600+
Locate requests logged every month
100%
Closed rate
18%
of Locate requests auto-cleared without manual intervention
65%
Improvement in Dispatcher Productivity
30%
Improvement in Locator Productivity

Business Benefits Realized

Rapid processing of asset locate requests

Significant reduction in operational costs associated with Locate operations

Enhanced customer experience and increased customer satisfaction

End-to-End digitalization and Geo-enablement of 'Request a Locate' life cycle

Real-time integration between Enterprise systems such as SAP and ArcGIS

Prior to the Geo-enabled LRMS, there were 3.5 FTEs who handled the typical dispatching duties, including dealing with locate request calls. Since the implementation of the LRMS, the dispatching staff has been permanently reduced to 2.5 FTEs for significant O&M savings. The reduction in staff was accomplished through reassignment of one Dispatcher to a vacant position within Water One. In addition to this staff reduction, the remaining dispatch staff has been able to take on other duties due to the efficiency gains from the LRMS. With the new LRMS, the Locator Supervisor is now able to assign work to each Locator based on pipe footage which is a better metric of the work effort required. The legacy process required the Supervisor to use a metric consisting of 15 locate tickets per day per Locator. Now, with the ability to know the expected footage, the Supervisor can assign work well above the past target number of 15 locate tickets per day per Locator. This has eliminated the need to pull extra Locators into the process from other work groups to cover the overflow from the old process this maximizing an eight-hour day.

Additionally, a better understanding of the anticipated workload is now achievable and staffing demands can be managed more effectively. The solution has reduced data entry and shortened the time between locates by having a geo-enabled reference of the locate needs, as well as routing the Locator to the next job as opposed to navigating a route to unfamiliar street coordinates.

Innovation is never easy, but the initiative taken by the leadership team at WaterOne – Mike Armstrong (General Manager), Jorge O’Neill (Director of IT), Dan Smith (Director of Distribution), continues to pave the way for reinventing and redefining the ways that water utilities can modernize their operations. Simultaneously improving customer and employee experience, while improving financial performance and ensuring that processes are transparent, trusted, and audited. WaterOne’s Locate Request Management System has provided awareness and a sense of ownership among the external and internal users to protect the utilities buried assets reducing the likelihood of service interruptions and other delivery issues, ensuring that drinking water is safely and reliably delivered to the citizens of Johnson County.

Authors

DS
Dan Smith
Director of Distribution at WaterOne

Dan Smith is Director of Distribution at WaterOne. He's responsible for the overall operation of the distribution system, which encompasses engineering, planning, design and infrastructure renewal, construction and maintenance, cross connection control program and the sale of all service connections and meters. He's a registered Professional Engineer in Kansas, earning a degree in Civil Engineering from the University of Nebraska (Lincoln). He also holds a Class IV Water Distribution Operator license in the State of Kansas. Dan has over 35 years of utility experience with 12 years of experience with a gas/water utility and the past 25 years in the water utility industry.

VT
Vish Tadimety
CEO at Spatialitics™

Vish Tadimety is CEO at Spatialitics™. Spatialitics™ specializes in bridging the gap between enterprise and geospatial data and delivering integrated business processes for organizations with its Spatial Analytics Platforms and Solutions. Vish has extensive experience as a turnaround specialist, raising capital from the public markets, strategic partners and venture funds.

SN
Sagar Nair
Associate Vice President

Sagar Nair is an Associate Vice President with deep experience in Geospatial Systems. For the last 8 years Sagar has worked with clients worldwide in implementing enterprise strength Spatial Applications in Utilities, Discrete Manufacturing, Healthcare and Public Sector. He works with Vish Tadimety in defining the strategy and deployment patterns of complex spatial applications for clients.

Spatialitics
Copyright Notice

This document contains information considered proprietary to Spatialitics LLC and is not to be copied, distributed, stored, duplicated or transmitted without the express written permission of Spatialitics LLC. All brand names used herein are trademarks of respective owners.

All references to third party products, partners and existing Spatialitics clients should be considered as confidential and may not be distributed without Spatialitics' written consent.

©Spatialitics LLC 2020

Spatialitics LLC
1301 West 22nd Street, Suite 308, Oak Brook, IL 60523, USA
+1-630-472-3200
info@spatialitics.com
www.spatialitics.com